Wellturn 731 Battery Powerd 3 Dog Remote Pet Training Collar

Wellturn 3 Dogs 1000m Remote E Collar

1.Battery Powered Dog Training Collar

2.1000m Remote E Collar with Ergonomic 
   Design

3.Basic Dog Training Function with 1-99 Levels

4.Auto-Protection Design, 100% Safe for Training
	    	

 Remote Dog Training Collar 731

 

Main Features

1. Up to 3 dog training system with 1000m remote control range.

2. Basic Dog Training Correction: Tone, Vibration and stimulation.

3. 99 intensity levels for corrections.

4. Allow setting 3 function merory groups for each dog.

5. Battery Operated System with 9V alkaline battery transmitter and AAA alkaline battery for receiver.

6. Advanced high-tech Microchip and RF modules with Low power consumption for long life battery.

 

Description:

DOG REMOTE COLLAR WITH MEMORY FUNCTION
The WT731 can solve your problems of reset the training modes every time when using, you just need to group up the corrections you want, then choose the intensity levels you dog will be then corrected under, set it as a group, train your dog with gruoped functions. You can set 3 groups for different occasions for each dog.

 

HUMANIZED MISTAK PREVENTION FUNCTION FOR DOG TRAINING
If you try press the corretion button over 10 seconds, which may cause mental or physical hurt to your dog if the correction keeps on, so the training system will stop deliver the stimulation, and you need to re-press the button to correct your dog if he doesn't give up the bad manner.

 

POWER SAVING FUNCTION FOR TRANSMITTER AND RECEIVER

The transmitter will go into standby mode without operated over 2 minutes and turn off in 3 minutes after standby mode.

The receiver will turn into sleep mode if it is unused for 4 minutes. Any movement will activate the receiver into the working mode.

 

 

Packing Detail

Transmitter

        x 1

Receiver

        x 1 

Nylon Strap

        x 1

9V alkaline battery

        x 1

AAA alkaline battery

        x 2

Contact Probes

        x 4

Test Light

        x 1

Use Manual

        x 1




 

Send an Enquiry

 

HOW TO USE

Remote E Collar 731

 

Basic operation

1. To install the batteries, open the battery cover at the back of the transmitter.

2. Install the battery (1 x6F22/9V) - ensure the polarity is correct.

3. The transmitter will be TURN ON automatically.

4. Press Mode button to choice the different mode(sound, vibration and static shock)  and press the

    UP/Down button on right hand side to set level.

 

 

 

Multi-Dog E Training Collar 731

 

 

 

Memory function

As is mentioned above, the remote training system uses vibration, static shock and warning beep as corrections, and the memory setting function makes it much more easy for you to train your dog individually and effectively, you just need to group up the corrections among the three training methods after pressing M1, and then adjust the proper intensity levels from 0-99, finally, press M2 to finish memory setting . You can set up 3 memory groups for each receiver accroding to their reaction towards the corrections and different occasions.

 

 

 

Bark Dog Training Remote Collar731

 

 

Power Saving function for the transmitter and receiver

1. The transmitter will turn into a standby mode if there is no operated for 2 minutes, and turn off

    3 minutes after standby mode.

2. Press mode button to wake up the transmitter in standby mode, and hold Mode button for 5

    seconds when it turns off.

3. The receiver will turn into sleep mode if it is unused for 4 minutes ,and any movement will

    activate the receiver into working mode.

 

 

WT 731 Dog E Collar 731

 

 

Mistake Prevention function

If you try press the corretion button over 10 seconds, which may cause mental or physical hurt to your dog if the correction keeps on, so the training system will stop deliver the stimulation, and you need to re-press the button to correct your dog if he doesn't give up the bad manner.

 

 

                       Good Dog Training E Collar 731

 

 

Find the Best Intensity Level for Your Pet

• Eliminate a bad habit of your dog or teach him a command gradually, it takes time for him to

   learn how to behave properly. Moving too fast may get him confused.

• Be consistent. Your dog need to go through corrections for several times till he understand why

   he is corrected.

• Do not use static shock too often in common cases, it may cause impect him mentally for over

   corrections.

• If your pet reacts uneasy to the corrections, redirect his attention to a simple command such

   as the "Sit" .

 

 

Send an Enquiry

 

Model

WT731

Gross Weight(kg)

0.285kgs

Receiver weight(kg)

0.085kgs

Box size(cm)

16×14.5×5.5cm

Receiver size(cm)

8.5×3.5×4.5cm

Remote size(cm)

11×5×3cm

Collar maximum(cm)

58cm

Collar minimum(cm)

34cm

  • © www.wellturn.com.cn
    All Rights Reserved.
    Web Design by Ealltech.

  • >