Wellturn PD-520 Dog Training Collar Rechargeable Waterproof Dog Trainer

Wellturn 2 Dogs 500 yards Remote Waterproof Dog Trainer

√  Rechargeable and waterproof

√  3 modes: electrostatic shock / vibration / sound and 100 levels

√  500 yards control distance

√  Control up to 2 dogs

√  Intelligent power saving



Main Features

1. Remote transmitter is small,flexible and simple to use.

2. Receiver collar is highly waterproof, so your pet can wear it and swim in the water.

3. It has 3 functional modes: static shock/vibration /sound.

4. Levels of vibration and static shock are adjustable,and a proper level has to be determined when you use this pet training systerm for the first time,you are advised to try Level 1-100 gradually.

5. The remote distance is 500 yards(without any disturbance).

6. There are two signal channels on the remote transmitter,it can control two receivers of the same model.

7. Energy-saving design:automatic stand by model and memory functions.

8. This model is suitable for most large,medium and small-sized dogs.




The PD-520 remote dog trainer collar is designed with basic pet dog training functions: Static Shock, Vibration ,Beep. What makes it different is it’s One-Stop training system. You don’t need to remember the buttons with their different functions, you may press ” the other buttons ” by mistake. For PD-520 remote dog trainer collar, You only need to adjust the level after pressing the function keys can be trained. In this way, you can get your dog well-trained effectively.

The PD-520 remote dog trainer collar is an remote collar with wide stimulation range for vibration and static shock, you can choose the proper levels depending on how your dog reacts while training, it goes well with a large range of dogs with different sizes. The No Jump design can protect the dog from sudden increase in intensity. make the training experience safe and enjoyable

The receiver will TURN OFF if it is unused for 1 minutes, and any movement will activate the receiver into STANDBY MODE. The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes.


Send an Enquiry





Contact signal between remote and receiver

1. Open the remote transmitter, adjust the level of vibration or static shock above 0.

2. Press the "1/2" button to choose a signal channel you want to use.

3. Press the ON/OFF button of receiver, the receiver will has a short "beep" sound, now the receiver is opening.then the red LED light will flash one time every 8 seconds.

4. After the receiver opening, press on/off button for 1 second,the red light will become fast flicker,the fast flicker will last for 10 seconds, at this time you must press function button(static shock/vibration /sound,which one all can be) of the remote,then you can listen a beep sound,it prove the remote and receiver contact signal successful.

5. If you do not press the function button within 10 seconds, please contact them again.

6. If you have 2 receivers, switch the "1/2" button to choose another channel for signal contact.








550 yards Remote Dog Training Collar and Integrated antenna design

PD-520 remote dog training collar with low energy dissipation high frequency remote signal transmitter chips ,can be up to 550 yards , also can be up to 500 yards even though there are the buildings,and More than 220 yards of remote control distance from similar products on the market. Then PD-520 remote dog training collar can be used inside and outside the door.

And use of integrated antenna ,no need to remove antennas when no use.







How to charge the trainer?

How to charge the remote?

1.Connect the remote transmitter to a charger into a standard socket.

2.The LED light on the remote turns blue when charging.

3.Once the remote is fully charged,the blue LED light turn off automatically.

How to charge the receiver?

1.Open the rubber cover,connect the receiver to a charger into a standard socket.

2. The LED light on the receiver turns red when charging.

3.Once the receiver is fully charged,the red LED light turn off automatically.






Test Dog Training Collar Systems

Static shock function test.

Static shock function can not be seen with the naked eye, please use our test light. Before test, please adjust the static shock above 0 level. Press the static shock function button, the test light will shine.

Vibration function test

Before the test, please adjust the vibration above 0 level. Press the vibration function button, the receiver will shake.

Sound function test

Sound function does not need to adjust, LCD screen display 000. Press the alarm button, the receiver will make a sound.






What can you do for your Product? 

1. You can choose your own product packaging, we can provide free design model. Until you are satisfied.

2. If you have your own logo, we can add your own logo to your product. But you have to pay a small fee.

3. According to different countries we are equipped with different plugs, For example: UE, US, UK, CN, AU or others.

4. You can also choose a different strap: TPU Collar Strap or Nylon Collar Strap.



Send an Enquiry




Gross Weight(kg)


Receiver weight(kg)


Box size(cm)


Receiver size(cm)


Remote size(cm)


Collar maximum(cm)


Collar minimum(cm)





Transmitter         x 1
Recvier         x 1
Nylon Strap         x 1
Charger         x 1
Neck Strap         x 1
Use Manual         x 1
Charging Cable         x 1
Contact Probes         x 4
Test Light         x 1
  • © www.wellturn.com.cn
    All Rights Reserved.
    Web Design by Ealltech.

  • >